A/SCTV-250 - The A/SCTV series current sensors monitor the current flowing to electrical equipment or buildings. The magnitude of this current is then converted into a linear 0 to 10 VDC output signa which can be monitored by your Building Managemen DD or PLC controller. In addition they offer jumper selectable input ranges. The A/SCTV series current sensors are fast acting and extremely accurate from 5% to 10% up to 100% of the FSO (Full Scale Output) depending on the model being ordered. They are factory calibrated using a NIST Traceable standard and shipped with the jumper placed in the largest jumper selectable range. The power for the A/SCTV series current transmitter is induced from the conductor being monitored. This means that no external power supply is necessary for the installation of these sensors. Since these units have a split-core desig they make an excellent choice for existing installations because you will not have to power down the unit and disconnect any wires during the installation process. The A/SCTV-250 current transmitter has jumper selectable ranges of 0-10 0-20 and 0-250 Amps. ACI analog current sensors or transmitters are designed for HVAC Building Automation or industrial systems.  Typical applications include: VF building load and load trending equipment. Patented 35mm Din-rail mounting flange Jumper selectable ranges

A/SCTV-50 - The A/SCTV series current sensors monitor the current flowing to electrical equipment or buildings. The magnitude of this current is then converted into a linear 0 to 10 VDC output signa which can be monitored by your Building Managemen DD or PLC controller. In addition they offer jumper selectable input ranges. The A/SCTV series current sensors are fast acting and extremely accurate from 5% to 10% up to 100% of the FSO (Full Scale Output) depending on the model being ordered. They are factory calibrated using a NIST Traceable standard and shipped with the jumper placed in the largest jumper selectable range. The power for the A/SCTV series current transmitter is induced from the conductor being monitored. This means that no external power supply is necessary for the installation of these sensors. Since these units have a split-core desig they make an excellent choice for existing installations because you will not have to power down the unit and disconnect any wires during the installation process. The A/SCTV-50 current transmitter has jumper selectable ranges of 0-1 0-2 and 0-50Amps. ACI analog current sensors or transmitters are designed for HVAC Building Automation or industrial systems.  Typical applications include: VF building load and load trending equipment. Patented 35mm Din-rail mounting flange Jumper selectable ranges

150A 0-10VDC SPLIT CORE SENSOR

CURR Anlg 0-10 VDC SCTV-50

A/SP-PUP - The ACI pickup port series is designed to help sense space pressures when used in conjunction with a differential pressure sensor. (See the A/DLP or A/MLP series cut sheets). Typical applications where this product is used include clean room laboratorie school and office buildings. The A/SP-PUP unit is a brushed stainless steel plate and the A/R-PUP unit is an attractive ABS plastic room enclosure. These units will fit over a standard single gang electrical box and are sealed with a foam gasket. Each unit includes a 70 micron filter and their barbed fittings will accept 3/16? I.D. tubing. When used in conjunction with an ACI pressure sensor the ACI pick up ports provide excellent accuracy and reliability. In addition they are designed to be rugged and easy to install.