Automation Components Inc (ACI)


12,210 products

Automation Components Inc (ACI)

A/1K-2W-RS-RJ6-A09

Automation Components Inc (ACI)

A/1K-2W-RSO-A03-C5

Automation Components Inc (ACI)

A/1K-2W-RSO-A28-C5

Automation Components Inc (ACI)

A/1K-2W-RSO-RJ6

1Kohm 6" Room Sensor

Automation Components Inc (ACI)

A/1K-2W-RSO-RJ6-A0

Automation Components Inc (ACI)

A/1K-2W-S-4X

A/1K-2W-S-4X - 1000 Ohms @ 32 degrees F ( platinum RTD sensing element) with a 0.00385 temperature coefficient. The polycarbonate NEMA 4X strap on configuration has a sensor potted to the back side of a copper plate and a foam pad creates compression when the strap worm drive is tightened. The final result is a good thermal transfer with pipes that range from 2 to 5" in diameter. ACI Strap on temperature sensors are designed for HVAC or Building Automation Systems.  Specific applications include: chiller hot water system tank and boilers. 

Automation Components Inc (ACI)

A/1K-2W-S-EH

A/1K-2W-S-EH - 1000 Ohms @ 32 degrees F ( platinum RTD sensing element) with a 0.00385 temperature coefficient. ACI Strap on temperature sensors are designed for HVAC or Building Automation Systems.  Specific applications include: chiller hot water system tank and boilers.

Automation Components Inc (ACI)

A/1K-2W-S-GD

A/1K-2W-S-GD - 1000 Ohms @ 32 degrees F ( platinum RTD sensing element) with a 0.00385 temperature coefficient. The galvanized metal strap on configuration has a sensor potted to the back side of a copper plate and a foam pad creates compression when the strap worm drive is tightened. The final result is a good thermal transfer with pipes that range from 2 to 5" in diameter. ACI Strap on temperature sensors are designed for HVAC or Building Automation Systems.  Specific applications include: chiller hot water system tank and boilers. 

Automation Components Inc (ACI)

A/1K-2W-S-GD-NIST

Automation Components Inc (ACI)

A/1K-2W-S-PB

A/1K-2W-S-PB - 1000 Ohms @ 32 degrees F ( platinum RTD sensing element) with a 0.00385 temperature coefficient. The plastic strap configuration has a sensor potted to the back side of a copper plate and a foam pad creates compression when the strap worm drive is tightened. The final result is a good thermal transfer with pipes that range from 2 to 5" in diameter. sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. Please note that this enclosure is rated to 140 degrees F. ACI Strap on temperature sensors are designed for HVAC or Building Automation Systems.  Specific applications include: chiller hot water system tank and boilers.